Name:     ID: 
 
    Email: 

70-291-Server-Ch12

Multiple Choice
Identify the letter of the choice that best completes the statement or answers the question.
 

 1. 

The command ____ removes all entries from the routing table.
a.
route delete 0*
c.
route *
b.
route -f
d.
route -d
 

 2. 

Which of the following protocols can be routed?
a.
TCP/IP
c.
AppleTalk
b.
IPX/SPX
d.
all of the above
 

 3. 

Multihomed devices ____.
a.
are configured for increased security
c.
have more than one network interface
b.
cannot function as routers
d.
cannot access the Internet
 

 4. 

The routing of packets from one network to another is called ____.
a.
IP forwarding
c.
IP transmitting
b.
IP transferring
d.
IP delivery
 

 5. 

Which of the following is the main reason to use a Windows Server 2003 machine as a router?
a.
speed
c.
efficiency
b.
cost
d.
security
 

 6. 

When creating a demand-dial connection, enabling the option to “Use scripting to complete the connection with the remote router” is ____.
a.
not normally required
b.
always required
c.
almost always required
d.
not recommended as it disables the ability to modify connection settings via GUI wizards
 

 7. 

The meaning of the metric value in a routing table varies ____.
a.
depending on the size of the network
c.
depending on the brand of router
b.
from network to network
d.
depending on the routing protocol
 

 8. 

Which of the following is true concerning routing tables on computer systems?
a.
They exist only on computers configured as routers.
b.
They exist on all computers.
c.
They only exist on Windows Server 2003 machines.
d.
They do not exist on Windows Server 2003 machines.
 

 9. 

In a routing table, the address for the default gateway is ____.
a.
255.255.255.255
c.
0.0.0.0
b.
0.0.0.255
d.
255.255.255.0
 

 10. 

In a routing table, what subnet mask is used to refer to an individual IP address?
a.
255.255.255.255
c.
0.0.0.0
b.
0.0.0.255
d.
255.255.255.0
 

 11. 

If a router receives a packet with a destination address that cannot be matched to a network, what does the router do to the packet?
a.
drops the packet
b.
sends the packet back to the sender
c.
sends the packet to the network that most closely matches the destination address
d.
sends the packet to the default gateway
 

 12. 

Which of the following is not a type of demand-dial connection?
a.
PPP
c.
PPPoE
b.
VPN
d.
dial-up
 

 13. 

Which type of routing is generally used when increased security is desired?
a.
forced
c.
dynamic
b.
tunneled
d.
static
 

 14. 

Which type of routing is used in most environments?
a.
forced
c.
dynamic
b.
tunneled
d.
static
 

 15. 

What are routing protocols responsible for?
a.
locating other networks automatically
b.
calculating paths from one network to another
c.
ensuring that routers can communicate effectively with one another
d.
ensuring that routers can communicate effectively with computer systems
 

 16. 

New demand-dial connections are created using the Demand-Dial Interface Wizard. The first option you are asked to configure by this wizard is which of the following?
a.
the name of the demand-dial interface
b.
the type of demand-dial connection
c.
the type of VPN connection to create
d.
the type of protocol and security options
 

 17. 

Which of the following is a distance-vector routing protocol used by Windows Server 2003?
a.
RIP
c.
IPR
b.
OPFS
d.
FOPS
 

 18. 

What is the maximum number of hops allowed by RIP?
a.
5
c.
15
b.
10
d.
20
 

 19. 

When a RIP router is sending information to other RIP routers, what type of communication is allowed?
a.
broadcasts
c.
both A and B
b.
multicasts
d.
neither A or B
 

 20. 

Which of the following marks a network as unreachable if it goes down?
a.
poison-reverse processing
c.
subnet summarization
b.
split-horizon processing
d.
IP shutdown
 

 21. 

Which of the following is a link-state routing algorithm?
a.
RIP
c.
OSPF
b.
PSOF
d.
PIR
 

 22. 

Which routing protocol is not available in 64-bit versions of Windows Server 2003?
a.
RIP
c.
OSPF
b.
POSF
d.
PIR
 

 23. 

Packet filters are ____.
a.
directional
b.
non-directional
c.
unable to filter based on port numbers
d.
unable to filter based on source addresses
 

 24. 

When is a demand-dial connection established between two routers?
a.
at regular intervals
c.
only when manually established
b.
only when there is data to send
d.
at random intervals
 

 25. 

At least how many static routes are required to trigger a demand-dial interface?
a.
zero
c.
two
b.
one
d.
three
 

 26. 

What dial-out hours are set by default for demand-dials?
a.
24 hours per day 7 days per week
c.
8 hours per day 7 days per week
b.
12 hours per day 7 days per week
d.
24 hours per day 6 days per week
 

 27. 

Which of the following is not a benefit of demand-dial filters?
a.
reduce the number of connections
b.
reduce time demand-dial connection is active
c.
increase security
d.
reduce long distance charges
 

 28. 

Which of the following provides proxy services?
a.
ASI
c.
ISA
b.
AIS
d.
SIA
 

 29. 

What is the normal configuration for a VPN demand-dial connection with a permanent Internet connection?
a.
persistent connections are disabled
b.
the servers are connected whenever RRAS is functional
c.
demand-dial
d.
disconnect after five minutes of idle time
 

 30. 

Each entry in a routing table contains which of the following information?
a.
IP address of network
c.
gateway used to reach the network
b.
subnet mask of the network
d.
all of the above
 

 31. 

Where are routing tables stored after they are read from the Windows registry?
a.
disk drive
c.
cache
b.
main memory
d.
registers
 

 32. 

What command can be used to view the routing table?
a.
netstat -v
c.
netstat -r
b.
netsh - r
d.
netsh -v
 

 33. 

Which of the following is true concerning packet filters?
a.
not useful for Win2k and later networks
b.
cannot filter based on protocol
c.
can filter based on source address only
d.
none of the above
 

 34. 

The route command normally effects which version of the routing table?
a.
copy stored in main memory
c.
copy stored on the domain controller
b.
copy stored in system cache
d.
copy stored in Windows registry
 

 35. 

In dynamic routing, how do routers build their routing tables?
a.
manually
b.
router to router interaction
c.
router and domain controller interaction
d.
router and Active Directory interaction
 



 
Submit          Reset Help